Good evening --
I'm not an electrician. However, I've successfully installed 5 Caseta wireless switches but this one has me stumped. I have a 3-way switched outlet. I bypassed the one switch where I'll use a Pico remote. For the Caseta switch, I have the power running to the switch's black lead. I got the lead from the brown screw on the old switch. I have the white and blue switch leads capped. I have the red lead tied to both cables from the two switch posts (not ground). I have ground tied in.
The switched outlet is always on. The Caseta switch has no "power" light and the on/off don't do anything. I've tried several different cabling configurations with no success. The only way I get power is my current configuration. Does anyone have any suggestions to correct my mistake?
Thanks,
Michael