Thanks Thanks:  0
Likes Likes:  0
Results 1 to 6 of 6

Thread: PD-6WCL not responding

  1. #1
    Junior Member
    Join Date
    Mar 2019
    Posts
    7

    PD-6WCL not responding

    Hello! I just installed a 6WCL with compatible Philips bulbs on a gym just outside my front door. I can see the switch and turn it on/off in my HomeKit app but the lights won’t respond. I understand it may be a little far but there is an extender about 30 ft away, through a glass door. There is good network reception in the gym area. Another detail, the wall box is metallic and the plate is one of those hard plastic ones that break easily. Any suggestions?

  2. #2
    Senior Member
    Join Date
    Oct 2013
    Posts
    1,040
    Do the lights work when you manually turn the dimmer on/off?

    Does it work in the Lutron app? If so, then it is in the HomeKit setup. If not, try readding to the software.
    LED, Incorporated
    Raleigh, NC 27614

  3. #3
    Junior Member
    Join Date
    Mar 2019
    Posts
    7
    Hello, thanks for the tip. They only work from the switch itself, not from any app.

  4. #4
    Authorized Lutron Contributor
    Join Date
    May 2013
    Posts
    503
    Could you try deleting it from the Caseta app and adding it back?
    Is it possible to move the range extender 5 feet closer?
    Is the unit being used as the range extender listed as the range extender in the Settings > Advanced menu in the Caseta app?
    How far is the range extender from the bridge?

  5. #5
    Junior Member
    Join Date
    Mar 2019
    Posts
    7
    The extender is set as extender and it’s about 20 feet away. I tried moving the extender closer to no result. The last thing I tried was removing it from its current location to a provisional one just to program it. This proved that the switch works but then I it back to where I need it and it doesn’t respond to anything wireless. Any thoughts?

  6. #6
    Junior Member
    Join Date
    Mar 2019
    Posts
    7

    Solved!

    Moved the extender in a different direction which could affect the light switch on my master br but so far so good. With this setup I might run into trouble down the road but I really hope for Lutron to improve the overall system to accept either multiple extenders or make the hun much stronger. Thanks to those who chimed their 2 cents.

    Cheers!

Similar Threads

  1. Caseta Dimmer PD-6WCL Not responding
    By NYUES in forum Troubleshooting - CAS
    Replies: 3
    Last Post: 04-12-2019, 12:37 PM
  2. Dimmer switch stopped responding
    By jaydee49 in forum Troubleshooting - CAS
    Replies: 2
    Last Post: 03-08-2019, 07:43 PM
  3. Smart Bridge Pro not responding
    By MiddKid in forum Troubleshooting - CAS
    Replies: 22
    Last Post: 09-20-2015, 09:17 PM
  4. SeeTouch LED's Not Always Responding Correctly
    By David C. in forum Troubleshooting - HWQS
    Replies: 4
    Last Post: 03-31-2015, 06:39 PM
  5. loads not responding
    By Craig W. in forum Troubleshooting - HWQS
    Replies: 1
    Last Post: 05-22-2013, 07:57 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •