Thanks Thanks:  0
Likes Likes:  0
Results 1 to 3 of 3

Thread: Just installed Caseta PD-6WCL (In-wall wireless dimmer): Getting weird response

  1. #1
    Junior Member
    Join Date
    Apr 2019
    Posts
    1

    Just installed Caseta PD-6WCL (In-wall wireless dimmer): Getting weird response

    Hi,
    I just installed the Caseta wireless dimmer (In-wall, PD-6WCL). When I press the On/Top button, the lights flash on at 100%, then off, then go gradually on from 0 to 100%. When I press the Bottom/Off, the lights go off. When I press the Top/On again, the light go On as expected. It is only the first time that you press the On/Top button that the lights behave in the On/Off/On manner. Has anyone seen this problem?

    I installed another switch in another room and it doesn't have this problem. They are the same model lights and switches in both rooms.

    Is there an on adjustment that I need to make? Is it a problem with the switch?

    I am using FEIT 6" Recessed LED light retrofits from Costco (Model #1200274).

    Thanks,
    Dean

  2. #2
    Senior Member
    Join Date
    Oct 2013
    Posts
    929
    I have seen similar things. Try resetting to factory defaults. You will need to add it to the program again.
    LED, Incorporated
    Raleigh, NC 27614

  3. #3
    Senior Member
    Join Date
    Jun 2013
    Posts
    1,102
    DeanS- Try setting the high end trim a bit lower on the dimmer. You can see different behavior on what seems to be identical set-ups as those circuits may have other things going on that make them behave differently. Feit's typically work "well", so you may have something else feeding back. Also try swapping some of the trims around. Feit being a lower end fixture, and mass producing for Costco, may result in variations of the trims that are causing the issue. Otherwise, I would tell you to get a PD-10NXD-WH neutral wire dimmer. That most likely would solve the issue in one shot.
    Business Development Associate- Design, Sales, Installation, and Programming of Smart Homes for Baker Electric Home Energy
    mbalay@bakerhomeenergy.com
    "Spread the light, brother" -Blake Richetta
    "If you think hiring a professional is expensive, wait until you hire an amateur" -Crustyloafer

Similar Threads

  1. HiHat buzzing after caseta dimmer installed
    By joe.caseta in forum Troubleshooting - CAS
    Replies: 3
    Last Post: 02-27-2018, 11:52 AM
  2. Pair 4 button wireless remote to Caseta In-Wall Dimmer?
    By tomkk in forum General Discussion - CAS
    Replies: 9
    Last Post: 11-12-2017, 01:51 AM
  3. Replies: 3
    Last Post: 10-04-2017, 05:13 PM
  4. Caseta Wireless 600-watt/150-watt Multi-Location In-Wall Dimmer
    By calirap in forum General Discussion - CAS
    Replies: 1
    Last Post: 01-06-2016, 09:19 AM
  5. Caseta in-wall wireless Dimmer will not go in to pairing mode
    By dan2016 in forum General Discussion - CAS
    Replies: 1
    Last Post: 10-28-2014, 11:01 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •