Thanks Thanks:  0
Likes Likes:  0
Results 1 to 2 of 2

Thread: If the radio link goes out, is a switch still functional?

  1. #1
    Junior Member
    Join Date
    Apr 2019
    Posts
    3

    If the radio link goes out, is a switch still functional?

    Suppose the RF goes down. Will switches/dimmers still function manually? (Of course, switching from a smart phone or "turn all lights off" in not possible.)

    In the case of multi-location hard-wired switches, will all switches continue to work?

  2. #2
    Yes, in the event a Repeater stops working for whatever reason, all switches/dimmers remain functional as stand-alone controls. This is one of the key advantages of having a wallbox-based system versus a centralized lighting control system such as a HomeWorks QS installation with RPMs

    Since the multi-location switches/dimmers are wired directly to the dimmer, they will also continue to work, you just lose use of keypads/Lutron Home+/Connect.

Similar Threads

  1. Link dropping
    By Whitenoise in forum Troubleshooting - HWQS
    Replies: 1
    Last Post: 02-07-2018, 11:39 AM
  2. Repeater non-functional after upgrade attempt (10.2 to 11.0)
    By ispcolohost in forum General Discussion - RA2
    Replies: 4
    Last Post: 05-30-2017, 07:53 PM
  3. Why is there a limit of 100 zones per RF link and 500 per wired link?
    By SparkyCoog in forum General Discussion - HWQS
    Replies: 2
    Last Post: 11-04-2016, 12:10 PM
  4. QS 10.4 link downloads 10.3
    By totesthouse in forum General Discussion - HWQS
    Replies: 0
    Last Post: 09-14-2016, 09:58 AM
  5. GE Link bba
    By Ekkoville in forum General Discussion - CAS
    Replies: 7
    Last Post: 11-18-2015, 08:01 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •