Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2

Thread: Help with Device Selection

  1. #1
    Junior Member
    Join Date
    Apr 2019
    Posts
    1

    Help with Device Selection

    I'm updating the lighting controls for a commercial meetingroom. The room has movable partitions and can be arranged as one large room,four rooms or something in between. There’s one location that has devices thatcontrols almost all of the lighting throughout, then each of the four areashave local devices just for lighting in that section. All of the lighting iscurrently incandescent, which I’m going to relamp with screw in LED.
    Currently the device inventory is 8 sets of two 3/waydevices (for each set one is a dimmer and the other a switch), and 4 S/Pdimmers. I would like to make it so that all 20 devices have dimming capability.
    The next hurdle is switch plates. It looks like there’re 4or 5 gang switch boxes with only 2 or 3 devices spread out and cover platesthat accommodate those arrangements.
    Which devices would work best for me and are plate coversgoing to be a problem?

  2. #2
    Senior Member
    Join Date
    Oct 2013
    Posts
    1,248
    Many commercial wall boxes do not have a neutral available. You should verify that before selecting devices. If a neutral is not available, I would have an electrician add it. A relatively minor cost and it gives you a lot more options for controls and LEDs.

    I would look at a RadioRA 2 system. It will give you local controls and you can put keypads or hybrids where needed. Plus you have the APP, potential shades, etc.

    Lutron makes a blank insert (DV-BI, SC-BI, NT-BI) in all gloss, satin and matte colors. You can use them to fill in the unused openings in a wallplate. You can also use unused spaces for keypads (another reason to add neutrals).
    LED, Incorporated
    Raleigh, NC 27614

Similar Threads

  1. Need help with switch selection
    By Turbo4door in forum Design Assistance - CAS
    Replies: 3
    Last Post: 01-15-2018, 10:01 AM
  2. RS-232 Interface Selection
    By AVTechGuy in forum 3rd Party Integration - General Commercial
    Replies: 0
    Last Post: 07-21-2017, 01:43 PM
  3. RadioRa2 device selection
    By Radio777 in forum General Discussion - RA2
    Replies: 3
    Last Post: 02-03-2017, 10:25 PM
  4. Occupancy sensor selection
    By Jeepdon in forum Design Assistance - RA2
    Replies: 1
    Last Post: 12-28-2015, 12:01 PM
  5. Help with dimmer Selection
    By mark2457 in forum Design Assistance - RA2
    Replies: 2
    Last Post: 08-24-2015, 08:04 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •