Thanks Thanks:  3
Likes Likes:  4
Dislikes Dislikes:  0
Results 1 to 3 of 3

Thread: Double stack w/ dimmer for LED (which says it's dimmable)

  1. #1
    Junior Member
    Join Date
    Mar 2019
    Posts
    2

    Double stack w/ dimmer for LED (which says it's dimmable)

    Thank you for looking!

    I've been researching for hours, but I'm just missing a ton of knowledge and thought it might be time for me to just ask for help. We had some lights installed and they're just too bright. So I thought, "Hey, I like the light, but if we had a dimmer this would be perfect". What I didn't realize was that LED lights sometimes require really different dimmers, so I fell into the rabbit hole for about 4 hours and came out none the wiser.

    We have a Kichler 38202 flushmount light which claims to be dimmable (according to one of the questions on the lowes site, the docs of course say nothing about this whatsoever). The answer from Kichler says yes, just look for an "ELV" dimmer, which in all my rabbit holing I didn't find mention of that at all, so I'm super confused. (https://www.lowes.com/pd/Kichler-14-...ollapse3048750 but you have to open the Q&A section, click the second question, then click More Answers to see the actual answer from Kichler themselves.)

    Okay, to make matters worse, we also have this in a double stack with an outlet in the closet. I don't think that needs to be dimmable, just on/off.

    So to summarize, I would love to know your advice about what double stack, dimmable switch I should get. Or even just keywords to look for would help.

    Thank you so much!

  2. Thanks Justin F. thanked for this post
    Likes Justin F. liked this post
  3. #2
    Senior Member
    Join Date
    Oct 2013
    Posts
    1,268
    leading edge/forward phase and trailing edge/reverse phase refer to where on the AC sine wave the dimming occurs. Incandescent, halogen and magnetic low voltage like forward phase dimmers. Electronic low voltage likes reverse phase. LEDs are all over the board.

    Lutron makes a series of stacked switches (Maestro Duo), but none have reverse phase capability.

    Lutron makes a couple of non-stacked dimmers that will work.

    Maestro
    MA-PRO - phase selectable (you program it to forward or reverse phase)
    MA-ELV - reverse phase

    Diva
    DVRP - reverse phase
    DVELV - reverse phase

    I would lean towards the MA-PRO or DVRP. The electronics were updated with LEDs in mind. I would also check the manufacturers site. They should have done some testing and have recommended model numbers.

    Lutron.com/LED may have some test results as well.
    LED, Incorporated
    Raleigh, NC 27614

  4. Thanks Justin F. thanked for this post
    Likes Justin F. liked this post
  5. #3
    Junior Member
    Join Date
    Mar 2019
    Posts
    2
    Omg, that makes so much more sense! Seriously, this is the clearest I've read and I spent _hours_ looking! I really, really appreciate that you were able to sum it up so quickly and easily. Thank you thank you thank you!!

  6. Thanks Justin F. thanked for this post
    Likes randyc, Justin F. liked this post

Similar Threads

  1. Dimmer vs led non dimmable
    By mestregroda in forum General Discussion - CAS
    Replies: 1
    Last Post: 10-04-2017, 06:23 PM
  2. Double Switch with Dimmer / Non Dimmer Combination
    By HandyMatt in forum General Discussion - Controls
    Replies: 1
    Last Post: 06-08-2017, 10:16 AM
  3. What if client wants a wallmount dimmer for a 0-10V dimmable light?
    By Dimerize in forum Design Assistance - RA2
    Replies: 2
    Last Post: 03-30-2016, 03:25 AM
  4. Lutron DVCL-153P-WH Diva Dimmable CFL/LED dimmer for LED strip lighting
    By CharlesDickens in forum Compatibility - LED
    Replies: 1
    Last Post: 07-20-2015, 02:17 PM
  5. Mains voltage dimmable LEDs vs Low Volatge dimmable LEDs with transformers
    By etienneterblanche in forum General Discussion - LED
    Replies: 5
    Last Post: 09-17-2014, 01:27 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •