Thanks Thanks:  0
Likes Likes:  0
Results 1 to 3 of 3

Thread: Two single poles in sync

  1. #1
    Junior Member
    Join Date
    Apr 2023
    Posts
    1

    Two single poles in sync

    Hi-

    I have a room with two light switches (both of them single pole Diva Smart Dimmers). Each switch controls the lights in half the room. How do I make it so that when either switch it turned on it turns on all the lights in the room, and when turned off, it turns off all the lights in the room. I have a Smart Hub.

    Thanks.

  2. #2
    Senior Member
    Join Date
    Oct 2013
    Posts
    2,587
    There is no programming logic in Caseta. You can use a Pico to turn both dimmers on together otherwise you are going to need a 3rd party device or program like a hub or IFTTT.
    Convergence Technologies Raleigh, North Carolina
    www.convergenceusa.com

  3. #3
    Lutron Technical Support
    Join Date
    Jan 2022
    Posts
    139
    The only way to activate two Caseta dimmers or switches simultaneously would be through a Pico remote paired to both devices or through a programmed scene in the Lutron app. Please note that pressing the buttons on the dimmers would still only activate that dimmer's specific load. Pressing the scene button in the app or a button on the paired Pico would activate both devices. Otherwise, you may be able to achieve this automation through a 3rd party integration as previously mentioned.

Similar Threads

  1. Is there a way to sync homeowner edits without transferring programming?
    By SparkyCoog in forum General Discussion - RA3
    Replies: 3
    Last Post: 03-26-2023, 10:25 PM
  2. Pico remote won't sync with system
    By Roller40 in forum Troubleshooting - CAS
    Replies: 2
    Last Post: 01-08-2017, 11:14 AM
  3. Error Sync-ing homeowner edits
    By paulhanks in forum Troubleshooting - RA2
    Replies: 6
    Last Post: 10-24-2016, 02:52 PM
  4. Cannot Update Software, Yet I See Prompt for Sync of Homeowner Edits?
    By schalliol in forum Troubleshooting - RA2
    Replies: 11
    Last Post: 06-19-2014, 10:28 PM
  5. Main repeater needs reboot every system sync
    By totalcontrol in forum Troubleshooting - RA2
    Replies: 1
    Last Post: 01-24-2014, 10:21 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •