Thanks Thanks:  1
Likes Likes:  1
Dislikes Dislikes:  0
Results 1 to 2 of 2

Thread: HWI Upgrade to HWQS Questions

  1. #1
    Junior Member
    Join Date
    Mar 2019
    Posts
    1

    HWI Upgrade to HWQS Questions

    Hi All

    Have a few questions regarding a system I am working on for a dealer, that is an upgrade to an old HWI system. Have found a few PDF's with info on this but some things I am not sure of.

    1) There are some old HWI-KP15-WH (HWI Architectural wire Keypads with master on/off) I dont see this model in the controls toolbox. I do see a "Custom HWI Keypad (24 button), will this work?

    2) For the Legacy HWI keypads I see needs HQ-HWI-LX Link Translator as well as software license. Is there any documentation on how this is added and used in Lutron Designer?

    Many thanks

    Colin

  2. #2
    Senior Member
    Join Date
    Oct 2013
    Posts
    1,150
    When you enable legacy devices under project options the legacy tab under controls is activated. Select the HWI-KP10, then view properties for the control station and change it to a 15 button. (I'm running 13.2).

    All of the HWI keypads use a numbering sequence. It doesn't matter which keypad you use, button 1 is always the same so the 24b keypad would work as long as you use the correct button numbers.

    Once you change a link on the processor to HWI keypads, the HWI-LX is automatically added.

    Don't forget, the HWI keypads require a 15v power supply. Also, the HWI keypads are physically addressed 1-32 so you can only put 32 keypads on a link.
    LED, Incorporated
    Raleigh, NC 27614

  3. Thanks Sachs thanked for this post
    Likes Sachs liked this post

Similar Threads

  1. HQ-HWI-LX and upgrade questions?
    By vining in forum General Discussion - Legacy HW
    Replies: 1
    Last Post: 11-12-2018, 09:08 PM
  2. New Guy With 2 Basic Questions
    By Chuck43 in forum General Discussion - CAS
    Replies: 8
    Last Post: 08-13-2018, 05:33 PM
  3. Wish List: HWQS Upgrade
    By schalliol in forum General Discussion - RA2
    Replies: 1
    Last Post: 08-09-2016, 12:32 PM
  4. Questions from a beginner
    By abollmeyer in forum General Discussion - RA2
    Replies: 2
    Last Post: 08-19-2015, 08:01 PM
  5. Questions for QSE-CI-NWK-E programming?
    By Blair S. in forum Programming - Shades
    Replies: 0
    Last Post: 07-05-2013, 06:39 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •