Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3

Thread: Interactive to Illumination Processors

  1. #1
    Junior Member
    Join Date
    Mar 2019
    Posts
    4

    Interactive to Illumination Processors

    I have an interactive system that has a HRP-120 and a HWI-PM-120 (MI-H48). The HWI-PM-120 is in a panel with the RPM's and the see touch keypads connected to it. I also have a remote panel with RPM's and a Module interface. I wanted to upgrade to Illuminations. I opened my Interactive file in Illuminations 1.33 and it converted my file. I have a HRP5-120 to replace the HRP-120. That seems to be fine. In Illuminations it switched my HWI-PM-120 to a H8P5-MI-H48-120. I though that as long as you had one P5 processor in Illuminations you could still have one older interactive processor. Is this not correct?

  2. #2
    Junior Member
    Join Date
    Mar 2019
    Posts
    4
    I am actually perfectly fine with the Interactive, but I am adding Control4 system to my house and was under the understanding that I would need to upgrade to Illumination for the system to control the Lutron system. I understand the rs-232 protocol is the same between the two, so maybe this is not needed?

  3. #3
    Authorized Lutron Contributor
    Join Date
    Sep 2018
    Posts
    238
    Thank you for your post DeweyDiablo.

    You would not be able to have both Illumination and Interactive processors in the same project. In Illuminations they would all need to be Illumination.

    The RS-232 integration protocol was not changed between Interactive and Illuminations.

Similar Threads

  1. Help with processors 4series
    By techniquesmethodes in forum Troubleshooting - HWQS
    Replies: 1
    Last Post: 06-10-2015, 09:53 AM
  2. Is it just me? QS 7.4 processors not always online
    By digit1 in forum Troubleshooting - HWQS
    Replies: 0
    Last Post: 04-10-2015, 07:16 PM
  3. IDing multiple processors
    By jkvossen in forum General Discussion - HWQS
    Replies: 4
    Last Post: 02-10-2014, 03:04 PM
  4. Upgrade interactive to illumination
    By nwjeff in forum General Discussion - Legacy HW
    Replies: 1
    Last Post: 01-09-2014, 04:16 PM
  5. Naming Links on processors in software?
    By digit1 in forum Design Assistance - HWQS
    Replies: 1
    Last Post: 10-30-2013, 09:34 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •