Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4

Thread: Hi-lume control

  1. #1

    Hi-lume control

    Hello all, hope this finds you well.

    I have 70± Prescolite LF4LEDG4 luminaires with Hi-Lume series A drivers I need to control with a dimmer and a slave/switch in a second location. I will be using 2 PHPM-120FP-WH-CPN-6366 interfaces as I need to use 2 circuits for the load.

    Question is, which Maestro devices do I need to control these interfaces?

    Side note, when I'm on the Lutron site at the Hi-Lume LED page and click on the 'Control Compatibility' link I get 'Error 404'.

    Thanks

  2. #2
    Pete F.
    Guest
    Chris, thank you for your post. You can use an RRD-6NA-xx(color) and an RD-RD companion. Here is the spec submittal for the PHPM. The wiring diagram that you would use is on page 7.

    Thank you for letting us know about the error message you are getting. We will get that fixed.
    Last edited by Kevin P.; 06-16-2015 at 11:05 AM. Reason: edited model numbers

  3. #3
    Thank you Pete and Kevin.
    I'm hard wired between my 2 switching locations. Do I need to use RadioRA devices?

  4. #4
    Pete F.
    Guest
    Chris,
    You can use the RA2 controls listed above, or you can use an MRF2-6ND-120-xx(color) and a companion dimmer MA-RR-xx(color). Both options will control the PHPM without an issue.

Similar Threads

  1. Want to learn more about the Hi-lume A-Series LED Driver?
    By Blair S. in forum Lutron Hi-Performance LED Driver - LED
    Replies: 2
    Last Post: 10-10-2013, 10:03 AM
  2. Replies: 1
    Last Post: 10-02-2013, 12:20 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •