Thanks Thanks:  1
Likes Likes:  1
Dislikes Dislikes:  0
Results 1 to 3 of 3

Thread: ceiling motion sensor turns lights on full

  1. #1
    Junior Member
    Join Date
    Aug 2017
    Posts
    23

    ceiling motion sensor turns lights on full

    I am looking to have a ceiling motion sensor that is manually paired with a Maestro Wireless elv dimmer turn the lights on at a preset level. At this moment when the wireless ceiling motion sensor trips the lights go on to full. How do i save the settings so the motion sensor turns the lights on at a preset level? Thanks for the help!

  2. Thanks Justin F. thanked for this post
    Likes Justin F. liked this post
  3. #2
    Senior Member
    Join Date
    Oct 2013
    Posts
    887
    I'm not 100% sure it will work but you can program the MRF dimmer turn on a preset level. It would depend if the sensor sends an "on" command or a "100%" command.
    LED, Incorporated
    Raleigh, NC 27614

  4. #3
    Hi AustinB.
    Thank you for your post! If you are using our Radio Powr Savr battery powered Occupancy Sensors like an LRF2-OCR2B-P-WH, you can set up a the occupancy sensor to turn the lights to a preset light level by doing the following:
    1.) Manually set the light level on the Maestro Wireless ELV dimmer using the up/down butons.
    2.) On the LRF2 Occupancy sensor, press and hold the light bulb button in for 5-6 seconds until the sensor lens starts to flash on/off and then release.

    The LRF2 Sensor will now turn the lighting load on to the preset light level when motion is detected with the lighting load off.

    Hope this info helps!

    -JustinF.

Similar Threads

  1. Lutron Caseta motion sensor lights
    By Squill in forum General Discussion - CAS
    Replies: 23
    Last Post: 05-08-2018, 10:12 AM
  2. Help with sensor that works with florescent ceiling lights 3 way
    By rsh916 in forum General Discussion - Controls
    Replies: 1
    Last Post: 10-09-2017, 03:52 PM
  3. Motion sensor, color lights, and Home integration
    By adiventure in forum 3rd-party Integration - CAS
    Replies: 2
    Last Post: 05-03-2017, 11:05 PM
  4. MA-LFQHW light swtich turns on fan on full brightness
    By teepee1232 in forum General Discussion - Controls
    Replies: 2
    Last Post: 10-09-2016, 09:14 AM
  5. Maestro Occupancy immediately turns off after detecting motion
    By Hayzen77 in forum Troubleshooting - Controls
    Replies: 4
    Last Post: 08-15-2015, 11:09 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •