Quote Originally Posted by evankirkhart View Post
Have your electrician run 3-conductor Romex (Black, Red, White, Ground) and have a switch gang for both the light and the fan.
His electrician already ran two different 14/2 conductors (Black, White, Green). I have found this to be better, as the motor can sometimes cause some feedback and flickering on the LEDs in the light kit. Easier to isolate with two separate runs.

simoneves- take a look at the Caseta system maxed out threads. Be careful that you do not exceed the 50 device limit, and remember that Picos count toward that number. You may want to consider Ra2 Select if you have even the slightest chance of exceeding the 50 limit.