Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3

Thread: The time in the processor always change

  1. #1

    The time in the processor always change

    Hi,

    I have a problem on my project, it using homeworks QS system + connect bridge. The time in the processor was always change, everytime i upload my program the time is good and it was set according to my laptop time. but after a few hours i checked the time it change to +1 of my laptop time. I suspect the problem caused by the connect bridge, is it right that the connect bridge could update the time in processor according to the country that i used in the program ? I used Singapore as the country but my project was in Indonesia which is 1 hour late by Singapore. Is there any way to resolve this problem ?

  2. #2
    Senior Member
    Join Date
    Oct 2013
    Posts
    2,587
    Yes, the Bridge will periodically go out and check time and adjust if necessary.

    You can NOT change the country after initial setup. However, there is a sneak...umm...work around.

    Go to Tools, Project Settings, Project Options (tab).
    Click "Add custom city."
    Fill in the details.
    Click done. Upload.

    You can create a temporary file with the Indonesian city, then go to Project Options and click "Show Details" to find the correct details.
    Convergence Technologies Raleigh, North Carolina
    www.convergenceusa.com

  3. #3

    Thank you

    Hi, Randy.

    Thanks for your idea, i'll try and hope this can work.

    Quote Originally Posted by randyc View Post
    Yes, the Bridge will periodically go out and check time and adjust if necessary.

    You can NOT change the country after initial setup. However, there is a sneak...umm...work around.

    Go to Tools, Project Settings, Project Options (tab).
    Click "Add custom city."
    Fill in the details.
    Click done. Upload.

    You can create a temporary file with the Indonesian city, then go to Project Options and click "Show Details" to find the correct details.

Similar Threads

  1. Something needs to change
    By mcignarella in forum General Discussion - HWQS
    Replies: 0
    Last Post: 10-02-2017, 07:50 PM
  2. Time Clock Events and daylight savings time
    By Soccerstar11 in forum Troubleshooting - RA2
    Replies: 1
    Last Post: 03-15-2017, 11:49 AM
  3. Away change thermostats to 61F how to change that
    By donmor in forum Troubleshooting - RA2
    Replies: 3
    Last Post: 01-07-2017, 08:25 PM
  4. Two Processor in One System but one processor failure
    By Syncon in forum General Discussion - HWQS
    Replies: 3
    Last Post: 08-01-2015, 10:08 AM
  5. P5 Processor - Super long time to boot
    By ndemarco in forum Troubleshooting - Legacy HW
    Replies: 8
    Last Post: 04-10-2014, 08:59 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •