Thanks Thanks:  0
Likes Likes:  0
Results 1 to 2 of 2

Thread: PD-6ANS and Mechanical not working

  1. #1
    Junior Member
    Join Date
    Feb 2019
    Posts
    5

    PD-6ANS and Mechanical not working

    I’ve seen other theeads but have not been able find any solutions, so here goes.

    I installed a PD-6ANS to replace a three-way switch, according to the instructions. I’ve double and tripple checked the wiring to be sure that I connected the switch to the correct wires. I also modified the connection to the mechanical switch on the other end as per the instructions. I’ve also double and tripple checked this. The wiring is correct.

    I was able to connect the switch to the bridge and it shows up on the app. The green LED comes on when I hit the on button and off when I hit the off button. It also responds correctly when I use the mechanical switch and everything syncs up on the app, but the lights won’t come on.

    The bulbs are all CFL bulbs and they are all good. Has anyone resolved this?

  2. #2
    Senior Member
    Join Date
    Oct 2013
    Posts
    2,587
    You may need the MLC that came with the switch.

    I know you triple-checked the wiring but it sounds like the switch can't see the load.
    Convergence Technologies Raleigh, North Carolina
    www.convergenceusa.com

Similar Threads

  1. PD-6ANS 3-way mechanical switch not working.
    By TexasBuyer in forum Troubleshooting - CAS
    Replies: 4
    Last Post: 02-07-2019, 08:38 PM
  2. Help with 3 way setup with mechanical and the PD-6ANS switches
    By royster in forum Troubleshooting - CAS
    Replies: 3
    Last Post: 02-07-2019, 05:37 PM
  3. 3 way dimmer - with mechanical switch?
    By regulatorfix in forum General Discussion - CAS
    Replies: 3
    Last Post: 11-04-2018, 08:07 AM
  4. NEW 3-way installation with mechanical switch
    By bombcar in forum Design Assistance - CAS
    Replies: 2
    Last Post: 03-24-2018, 09:44 AM
  5. 3-Way with Mechanical Switch | Pro
    By Tucker1 in forum Troubleshooting - CAS
    Replies: 5
    Last Post: 02-08-2016, 11:28 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •