Testing post
Testing post
Bradley
elahome.com
NetStreams-DigiLinX, Lutron HWI, to URC IP Server
We have a well maintained NetStreams-DigiLinX system along with a HWI system. They can talk to each other and command each other
Example of what Lutron HWI sends down the RS-232 line to the MLA4000/CL(ControLinX) line
#@Office Player#ACTIVE ON\r
#@Office Player#ACTIVE OFF\r
What we are trying to do is to send RS-232 command from HWI to a server/driver that is loaded in the URC MRX-10N or 15 or 30
I am getting the driver to respond one time.... I know this is a DigiLinX issue, it grabs a hold of the connection.
Wondering any recommendations to send RS-232 out of HWI proc to a black box that would send TCP or UDP commands onto the IP Network.
I can hit a browser and type this below: ... it works, so the URC system is working.
http://192.168.1.210:45900/Office_On
http://192.168.1.210:45900/Office_Off
What do we type into the HWI to do this or do we need to use the other serial port and buy a RS-232 to IP convertor?
Bradley
elahome.com