Thanks Thanks:  1
Likes Likes:  1
Dislikes Dislikes:  0
Results 1 to 2 of 2

Thread: Need A19 LED for Maestro C_L MSCL-OP153MH

  1. #1
    Junior Member
    Join Date
    Jan 2019
    Posts
    1

    Need A19 LED for Maestro C_L MSCL-OP153MH

    Hi guys, Installed the Maestro CL and now have the ghosting problem. Lights won't turn off all the way. I have Feit LED lights. I understand about compatibility issues so I've been trying to find bulbs with no luck. I've tried both compatibility tools here on the Lutron site but none of the bulbs are available. I found two available for shipping from homedepot but will not ship to California. Running out of options other then returning the dimmer which i really like. Any help will be appreciated. Thanks.

  2. Thanks Justin F. thanked for this post
    Likes Justin F. liked this post
  3. #2
    Authorized Lutron Contributor
    Join Date
    Sep 2018
    Posts
    87
    Hello vazper,
    Thank you for your post! Unfortunately, Lutron only conducts compatibility testing with the LED lamps themselves and has no indication from the manufacturer if the lamp is (or will be) compliant with any local or national electrical codes or regulations. As such, we don't have the ability to offer filters to locate which are and aren't. We apologize that we do not have this information for you and can only recommend to contact the LED manufacturer directly to confirm which of their Dimmable LED bulbs are compliant to be shipped to California.

    -JustinF

Similar Threads

  1. MSCL-OP153M Always On?
    By lijinv in forum General Discussion - Controls
    Replies: 1
    Last Post: 09-10-2018, 08:54 PM
  2. MSCL-OP153MH - will not turn off (ever). Will not enter programming mode
    By A Jarrell in forum General Discussion - Controls
    Replies: 7
    Last Post: 08-29-2018, 08:09 AM
  3. MSCL-OP153M Auto-oin
    By kbogott in forum Programming - Controls
    Replies: 1
    Last Post: 02-23-2017, 04:17 PM
  4. MSCL-OP153MH at a 4-way switch and MA-RR Companion at a 3-way dead-end
    By paulpv in forum Troubleshooting - Controls
    Replies: 3
    Last Post: 01-23-2017, 06:56 AM
  5. Using 2 MSCL-OP153M on the same 3-way circuit.
    By Brian W. in forum General Discussion - Controls
    Replies: 0
    Last Post: 02-06-2014, 03:25 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •