Thanks Thanks:  1
Likes Likes:  2
Dislikes Dislikes:  0
Results 1 to 2 of 2

Thread: Non daisy-chained wallstations

  1. #1
    Junior Member
    Join Date
    Jan 2019
    Posts
    1

    Non daisy-chained wallstations

    First post here, hopefully someone can advise. I just finished renovating my house, part of which involved reusing an existing GRX-3106 in a different part of the house, controlling 5 loads. The work wasn't done by an experienced Lutron installer, but the electrician associated with my rather excellent contractor. It is all working well and I am generally happy.....BUT....I took the GRX out of the backbox to connect a GRX-RS232 today and discover that the wallstations have not been daisy chained, but all terminate in a connector in the backbox and from there to the MUX port.

    The walls being long closed, I am, obviously, loathe to ask them to redo the work unless I am truly storing up problems for myself down the line. Given that things seem fine, if it is 'merely' a question of best practice, then I am minded to leave it as is.

    Can anyone advise?

    Marc

  2. Likes Justin F. liked this post
  3. #2
    Senior Member
    Join Date
    Oct 2013
    Posts
    1,155
    Functionally, it will work fine.
    LED, Incorporated
    Raleigh, NC 27614

  4. Thanks Justin F. thanked for this post
    Likes Justin F. liked this post

Similar Threads

  1. Lumaris undercabinet lights, lens sagging at daisy-chain connections
    By Neurorad in forum General Discussion - LED
    Replies: 11
    Last Post: 06-05-2017, 11:56 AM
  2. Daisy Chain HWQS Keypads
    By DavidGroves in forum Design Assistance - HWQS
    Replies: 2
    Last Post: 08-04-2016, 07:49 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •