-
Non daisy-chained wallstations
First post here, hopefully someone can advise. I just finished renovating my house, part of which involved reusing an existing GRX-3106 in a different part of the house, controlling 5 loads. The work wasn't done by an experienced Lutron installer, but the electrician associated with my rather excellent contractor. It is all working well and I am generally happy.....BUT....I took the GRX out of the backbox to connect a GRX-RS232 today and discover that the wallstations have not been daisy chained, but all terminate in a connector in the backbox and from there to the MUX port.
The walls being long closed, I am, obviously, loathe to ask them to redo the work unless I am truly storing up problems for myself down the line. Given that things seem fine, if it is 'merely' a question of best practice, then I am minded to leave it as is.
Can anyone advise?
Marc
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Functionally, it will work fine.
-
Post Thanks / Like - 1 Thanks, 1 Likes, 0 Dislikes