Newbie ... caseta dimmer install stalled ... HELP

[PalanceH]

I’m ALMOST there!! Bought 10 caseta dimmer switches to start my room by room upgrade. 1st instal stalled. 3 switch panel. Followed all instructions. Step I’m stuck on is actually getting the 3 dimmers/wall plate to push into wall. There are so many cables that are thick and hard to move. So i can’t push the dimmers in all the way for a flush finish on wall. Is there some clever workaround, ie a different face plate that covers gap from wall? Or do I need to figure out a way to move all these wires? I don’t want to push too hard and damage any of the dimmers.

[Larry in TN]

No shortcuts but look for some YouTube videos showing how to fold the wires neatly into the box. If you don't think you're up to it, you can call an electrician out to do the box for you.