Hi-I've been poking around some of the threads trying to get a handle on the LUT-MLC placement - particularly in a setup where I don't have a neutral.
I have 2 scenarios - easiest is PD-5S-DV-WH with an LED bulb that doesn't go 'off', but glows dimly (so I believe I need the shunt capacitor to absorb the trickle current).
Reading the install instructions, it says to install the MLC between the neutral and the hot-switched cable. If I don't have a neutral, can I still use it? (so I have 2x black (1 hot, 1 switched) and the ground).
I have exactly the same scenario installing a MSCL-OP153M digital dimmer with an LED downlight - so again, with no neutral I'm wondering if I can use the MLC to help.
Thanks in advance for pointers/advice.