Thanks Thanks:  0
Likes Likes:  0
Results 1 to 4 of 4

Thread: Blinking unless using full ON

  1. #1
    Junior Member
    Join Date
    Nov 2018
    Posts
    3

    Blinking unless using full ON

    So I was super excited to change all my dimmer switched to Caseta Wireless dimmers, sadly I'm having a deal breaker of an issue...

    Video of what I am experiencing
    https://photos.app.goo.gl/X3sD6WagiQDeXSFY9

    Basically, If I turn off the lights with the bottom button, they dimm all the way down and it's fine.
    If I use the dimm up button, the LEDs continually flash.
    If I use the top button, there's an initial blink, as it dimms up, once it has reach the top level, the LED remain on

    Is there anything I can do for this? I've seen a video on youtube where the poster in the comments says he used the LUT-MLC and it fixed his problem?
    Here is the video :
    https://www.youtube.com/watch?v=yRpcbXH_KO8

  2. #2
    Senior Member
    Join Date
    Oct 2013
    Posts
    2,587
    Check to make sure the dimmer and LED are compatible. Lutron does some testing (lutron.com/led). The LED manufacturer should have a list of recommended dimmers.

    You can try adjusting the trim. Instructions are here:
    http://www.lutron.com/TechnicalDocum...structions.pdf

    Use a dimmer with a neutral connection. The 6WCL is good for screw-in bulbs but the 10NXD is better all the way around.
    Convergence Technologies Raleigh, North Carolina
    www.convergenceusa.com

  3. #3
    Junior Member
    Join Date
    Nov 2018
    Posts
    3
    Quote Originally Posted by randyc View Post
    Use a dimmer with a neutral connection. The 6WCL is good for screw-in bulbs but the 10NXD is better all the way around.
    Ok, I will go get a 10NXD and try that one!

  4. #4
    Junior Member
    Join Date
    Nov 2018
    Posts
    3
    Quote Originally Posted by randyc View Post
    Use a dimmer with a neutral connection. The 6WCL is good for screw-in bulbs but the 10NXD is better all the way around.
    Thanks for the tip, I bought 4 10NXDs Saturday and installed them and everything is working great!

Similar Threads

  1. blinking lights
    By leachman in forum General Discussion - CAS
    Replies: 3
    Last Post: 12-28-2016, 09:30 AM
  2. Security flash/full on vcrx
    By Tom L in forum General Discussion - RA2
    Replies: 14
    Last Post: 09-26-2016, 11:23 AM
  3. Lights Blinking
    By dharriff in forum Troubleshooting - HWQS
    Replies: 4
    Last Post: 12-04-2015, 07:15 AM
  4. Blinking LEDs on 6D
    By schalliol in forum Troubleshooting - RA2
    Replies: 2
    Last Post: 07-30-2014, 05:12 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •