I recently added a PD-6ANS to an existing system to control a switch that activates my Christmas light eave plug. I have 6 strings of LED bulbs each rated at a total wattage of 6W for a total of 30w. When all 5 are connected to the plug the switch will turn on but the lights won’t illuminate. When I unplug one of the strings and then turn on the lights, the remaining 4 illuminate.
I presume that the issue occurs when the lights are powering on and more amperage is drawn but it seems light an awfully small load considering that the lights themselves advise connecting up to 36 strings to one outlet is acceptable. This makes it hard for me to believe the Lutron switch would be anywhere close to maxed (600w) so anything here I’m not understanding? Thanks all.