-
MA-R (3 way setup) stopped working
Shortly after switching out bulbs the lights would flicker occasionally.
Now one of the switches has stopped working completely and the one that still sorta works doesn't dim properly.
Does anyone have a troubleshooting guide for this setup?
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
If the dimmer isn't designed to work with LEDs (like MACL-153) it has a minimum load of 50 watts. It will do weird things if it doesn't have the minimum load.
-
Post Thanks / Like - 1 Thanks, 1 Likes, 0 Dislikes
-
Authorized Lutron Contributor
Hello jmurray,
Thank you for your post! It sounds like you might be using LED bulbs for your lighting load. With any of our C.L dimming controls, you would want to verify it is a compatible LED bulb. To verify if the bulbs are causing the issue, could you replace just one of them with an incandescent or halogen light bulb to see if it negates the flickering? If it does we would advise moving to an LED bulb listed on our compatibility tool @ http://www.Lutron.com/LEDFinder
Hope this information helps!
-JustinF.