Results 1 to 3 of 3

Thread: QS to control RA2

  1. #1
    Junior Member
    Join Date
    Oct 2014
    Posts
    6

    QS to control RA2

    Can I use a QS system to control a RA2 system? The Ra 2 is maxed out and I need to add more devices.

  2. #2
    Authorized Lutron Contributor
    Join Date
    May 2013
    Posts
    513
    Yes you can. You would need to program a 3rd party device in the HomeWorks QS system to send commands that would press buttons on the RadioRa2 system and connect both systems on the same network.
    Attached Files Attached Files

  3. Thanks RA2-Designer-Gal thanked for this post
    Likes RA2-Designer-Gal liked this post
  4. #3
    Junior Member
    Join Date
    Sep 2013
    Posts
    11
    Quote Originally Posted by PCH2OMAN View Post
    Can I use a QS system to control a RA2 system? The Ra 2 is maxed out and I need to add more devices.
    Did you reach the 200 devices limit of a RA2 system?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •