Thanks Thanks:  1
Likes Likes:  0
Page 1 of 5 123 ... LastLast
Results 1 to 10 of 48

Thread: Lights flash when turned on

  1. #1
    Junior Member
    Join Date
    May 2015
    Posts
    7

    Lights flash when turned on

    When i turn on the lights with either caseta control or the pico remote, the lights flash once at full brightness , turn off then slowly raise brightness to proper setting.

    what can cause this.

    im using brand new CREE led lights that are dimmable

  2. #2
    Lutron Technical Support
    Join Date
    May 2013
    Posts
    639
    Quote Originally Posted by Grsthegreat View Post
    When i turn on the lights with either caseta control or the pico remote, the lights flash once at full brightness , turn off then slowly raise brightness to proper setting.

    what can cause this.

    im using brand new CREE led lights that are dimmable
    There could be some kind of incompatibility between the LED and the dimmer you are using. You said it is a Cree LED. Do you know the model number of that LED, as printed on the bulb itself?

  3. #3
    Junior Member
    Join Date
    May 2015
    Posts
    7
    Quote Originally Posted by Brian W. View Post
    There could be some kind of incompatibility between the LED and the dimmer you are using. You said it is a Cree LED. Do you know the model number of that LED, as printed on the bulb itself?
    they are cree BA19-08027OMF-12DE26-3U100

  4. #4
    Junior Member
    Join Date
    May 2015
    Posts
    7
    Quote Originally Posted by Brian W. View Post
    There could be some kind of incompatibility between the LED and the dimmer you are using. You said it is a Cree LED. Do you know the model number of that LED, as printed on the bulb itself?
    oops, the true model # is BA19-11027OMF-12DE26-1u100. i looked at the wrong lamp before

  5. #5
    Lutron Technical Support
    Join Date
    May 2013
    Posts
    639
    Quote Originally Posted by Grsthegreat View Post
    oops, the true model # is BA19-11027OMF-12DE26-1u100. i looked at the wrong lamp before
    Lutron has conducted preliminary testing on the Cree LED’s that you are inquiring about, however based upon unsatisfactory testing performance, we are unable to recommend a dimming control for those LEDs at this time. In the event that you are locked into using those specific Cree LEDs, we would suggest contacting Cree and asking them for a list of compatible dimming controls that they can recommend for these specific products.

    If selecting another LED is an option, please visit our LED selection tool at www.lutron.com/ledtool. This tool will provide you with the most up to date compatible LED products that we can recommend for use with our LED rated dimming controls.

  6. #6
    Junior Member
    Join Date
    May 2015
    Posts
    7
    Quote Originally Posted by Brian W. View Post
    Lutron has conducted preliminary testing on the Cree LED’s that you are inquiring about, however based upon unsatisfactory testing performance, we are unable to recommend a dimming control for those LEDs at this time. In the event that you are locked into using those specific Cree LEDs, we would suggest contacting Cree and asking them for a list of compatible dimming controls that they can recommend for these specific products.

    If selecting another LED is an option, please visit our LED selection tool at www.lutron.com/ledtool. This tool will provide you with the most up to date compatible LED products that we can recommend for use with our LED rated dimming controls.
    Well, thanks anyway. Im locked into them. Have customer with $300.00 worth of them. Wants remote dimmer.

  7. #7
    Junior Member
    Join Date
    May 2015
    Posts
    7

    stll having issues

    Quote Originally Posted by Brian W. View Post
    Lutron has conducted preliminary testing on the Cree LED’s that you are inquiring about, however based upon unsatisfactory testing performance, we are unable to recommend a dimming control for those LEDs at this time. In the event that you are locked into using those specific Cree LEDs, we would suggest contacting Cree and asking them for a list of compatible dimming controls that they can recommend for these specific products.

    If selecting another LED is an option, please visit our LED selection tool at www.lutron.com/ledtool. This tool will provide you with the most up to date compatible LED products that we can recommend for use with our LED rated dimming controls.
    i went out and spent $130.00 on new Sylvania 592632 lamps that ARE LISTED on your web site as compatable. the lights STILL flash once then shut off, then slowly ramp up to full.

    so what gives.

  8. #8
    Junior Member
    Join Date
    May 2015
    Posts
    7
    Quote Originally Posted by Grsthegreat View Post
    i went out and spent $130.00 on new Sylvania 592632 lamps that ARE LISTED on your web site as compatable. the lights STILL flash once then shut off, then slowly ramp up to full.

    so what gives.
    they also have a number on them model 79084

    there listed on your site as fully compatable

  9. #9
    Lutron Technical Support
    Join Date
    May 2013
    Posts
    639
    Quote Originally Posted by Grsthegreat View Post
    they also have a number on them model 79084

    there listed on your site as fully compatable
    When we tested that bulb, we did notice the lights occasionally flashing on when the Caseta dimmer was turned on. We found the best way to try and reduce or eliminate this from happening is to set the low end trim of the dimmer a little higher.

    Here is the link on how to set the low end trim: http://www.casetawireless.com/Docume...ced%20Inst.pdf. (See page 35.)

  10. #10
    Junior Member
    Join Date
    May 2015
    Posts
    7
    Quote Originally Posted by Brian W. View Post
    When we tested that bulb, we did notice the lights occasionally flashing on when the Caseta dimmer was turned on. We found the best way to try and reduce or eliminate this from happening is to set the low end trim of the dimmer a little higher.

    Here is the link on how to set the low end trim: http://www.casetawireless.com/Docume...ced%20Inst.pdf. (See page 35.)
    Ok, tried this. I went so far as to set the low end only a few clicks below high end. As soon as the lamps cooled, they still flash once when turned in.

    im returning this piece of junk dimmer.

    your company needs to do alot more design on a $60.00 dimmer before you dump it on the market.

    your industry is shoving led technology down our throats. Im an electricial contractor and just wasted 4 hours of unbillable time trying to install this piece of junk on a job, not including over $300.00 spent on useless....non dimmable even though they claim dimmable... Led lamps.

    im just about thru purchasing lutron products.

    by the way..we do nearly $1,000,000 in sales and installs per year.

Page 1 of 5 123 ... LastLast

Similar Threads

  1. Replies: 1
    Last Post: 04-22-2014, 11:34 AM
  2. Bug? - Flash Output Causes whole system to flash
    By rdgerken in forum Troubleshooting - RA2
    Replies: 3
    Last Post: 12-16-2013, 07:47 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •