Results 1 to 8 of 8

Thread: Homeworks 4 series and sivoia

  1. #1
    Junior Member
    Join Date
    May 2015
    Posts
    9

    Homeworks 4 series and sivoia

    Currently have an older homework 4 series system with in wall keypads controlling sivoia shades. The hw 4 processor is connected to a HWI-Q96. I need for a new control4 system to control the shades, any suggestions?

  2. #2
    Super Moderator
    Join Date
    May 2013
    Posts
    186
    It would just me a matter of integrating the two systems. Control4 can send commands to the Homeworks system to control the shades. We also have Control4 drivers available that will work with Homeworks Illumination or Homeworks Interactive. The drivers can be downloaded from the Homeworks resource website.

  3. #3
    Junior Member
    Join Date
    May 2015
    Posts
    9
    Yes, but I need to figure out what the virtual address of each shade is so that I can input that info into control4

  4. #4
    Super Moderator
    Join Date
    May 2013
    Posts
    186
    You can run an addressing report using the Homeworks software.

  5. #5
    Junior Member
    Join Date
    May 2015
    Posts
    9
    Is that using illumination? Do I have to extract the project file to run the report?

  6. #6
    Super Moderator
    Join Date
    May 2013
    Posts
    186
    You will need a copy of the file to run that report. You can attempt to extract the file if you do not have a copy. You would be using the Homeworks Illumination software if the system is Homeworks Illuminations. A Homeworks 4 series system can mean Illumination or Interactive.

  7. #7
    Junior Member
    Join Date
    May 2015
    Posts
    9
    How do I know which one to use? I've tried to extract using illumination and eventough it claims a correct extraction, I can't open the extracted file, I get a 3011 jet database error.

  8. #8
    Super Moderator
    Join Date
    May 2013
    Posts
    186
    You can identify which system it is by the model number of the processor. If the extraction was successful and you cannot open the file, then the file is corrupt. If the file size is larger than 1MB, you can email the file to hwsupport@lutron.com and we can attempt to repair the file.

Similar Threads

  1. Homeworks 4 series and Sivoia Shades
    By laggs in forum 3rd-party Integration - Legacy HW
    Replies: 9
    Last Post: 06-02-2015, 08:28 AM
  2. Want to learn more about the Hi-lume A-Series LED Driver?
    By Blair S. in forum Lutron Hi-Performance LED Driver - LED
    Replies: 2
    Last Post: 10-10-2013, 10:03 AM
  3. Replies: 1
    Last Post: 10-02-2013, 12:20 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •