Thanks Thanks:  0
Likes Likes:  1
Results 1 to 5 of 5

Thread: Occupancy Sensor

  1. #1
    Junior Member
    Join Date
    Nov 2013
    Posts
    23

    Occupancy Sensor

    Are there instructions available on how to change the RF signal settings of a Power Saver Occupancy Sensor from 1 main repeater to a different main repeater? I have tried multiple times to follow the instructions to change the RF channel that are online but can't seem to be a be able to activate a occupancy sensor to a main repeater that was I'd to a different main repeater in my system. I have 2 main repeaters on the system - the old repeater and a 2nd was added using the inclusive software.

  2. #2
    Junior Member
    Join Date
    Nov 2013
    Posts
    23
    Click image for larger version. 

Name:	image1.jpeg 
Views:	21 
Size:	119.7 KB 
ID:	346This is the screenshot of the instructions

  3. Likes schalliol liked this post
  4. #3
    Junior Member
    Join Date
    Nov 2013
    Posts
    23
    Anyone knows how to address this problem?

  5. #4
    Senior Member
    Join Date
    Jun 2013
    Posts
    1,365
    I used to have a specific document for this conversion. Have you contacted technical support? I have made this work before. Your other option is to move the sensors over to the first main, but that may not be easy or possible- especially if the system is already up and running.
    Simple automation when DIY isn't working
    intuitivehomecontrols@gmail.com
    fb.me/intuitivehomecontrols

  6. #5
    Junior Member
    Join Date
    Nov 2013
    Posts
    23
    Called Tech Support and they walked me through it. Thanks!!

Similar Threads

  1. LRF3-OCRB-P-WH occupancy sensor Operating during sufficient daylight
    By jwbcinergy in forum Troubleshooting - HWQS
    Replies: 0
    Last Post: 05-11-2015, 02:44 AM
  2. Occupancy Sensor Programming
    By troltgen in forum Programming - HWQS
    Replies: 0
    Last Post: 01-26-2015, 01:52 PM
  3. Passive infrared Occupancy/Vacancy sensor switch
    By tbone in forum General Discussion - Controls
    Replies: 1
    Last Post: 01-08-2015, 08:39 AM
  4. Turning Staircase & Occupancy Sensor(s)?
    By schalliol in forum Design Assistance - RA2
    Replies: 5
    Last Post: 10-12-2014, 10:01 AM
  5. maestro occupancy sensor
    By Christiann in forum General Discussion - Controls
    Replies: 0
    Last Post: 07-05-2014, 04:14 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •