Results 1 to 3 of 3

Thread: Surface mount Pico next to X-gang box

  1. #1
    Senior Member
    Join Date
    Mar 2015
    Posts
    147

    Surface mount Pico next to X-gang box

    I have a 3-gang box that I'd like to add a Pico remote to, creating a 4-switch grouping. If I surface-mount the Pico to the left or right of my 3-gang box will I be able to use a 4-gang wall plate? My question is mainly whether I'll have any issues with switch spacing or depth off the wall which might cause the wall plate to not fit correctly over the four switches.

  2. #2
    Senior Member
    Join Date
    Jun 2013
    Posts
    666
    asherrick-
    No problem. Attach the 4gang to the box, with the empty on what ever side you want. If you use the wallbox adaptor, attaché the adaptor and pico prior to installing the plate on the box.
    Residential Lighting and Shading Specialist for CED Escondido

    mbalay@cedescondido.com

  3. #3
    Senior Member
    Join Date
    Mar 2015
    Posts
    147
    Perfect. Thanks!

Similar Threads

  1. 5 buttons pico and pico engraving ?
    By mehuneau in forum General Discussion - HWQS
    Replies: 3
    Last Post: 05-12-2015, 04:31 PM
  2. one gang box, two lights and one remote.
    By npriest in forum Design Assistance - Controls
    Replies: 3
    Last Post: 03-10-2015, 05:51 PM
  3. Radio Ra 2 on Surface Pro 3?
    By jayhammer27 in forum General Discussion - RA2
    Replies: 1
    Last Post: 12-23-2014, 09:17 PM
  4. Can I Mount the H48 Board on a Third Party Panel?
    By Armando B. in forum Design Assistance - HWQS
    Replies: 0
    Last Post: 03-03-2014, 03:44 PM
  5. Hardware Request. Singel Gang Fan/Dimmer
    By thefish in forum General Discussion - HWQS
    Replies: 3
    Last Post: 10-24-2013, 09:47 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •