Results 1 to 2 of 2

Thread: One dimmer and two remotes

  1. #1
    Junior Member
    Join Date
    May 2015
    Posts
    4

    One dimmer and two remotes

    I am very pleased with my Caseta/SmartBridge system. But I am setting some remotes in rooms to be used simply for local control and would like to pair single Caseta dimmers with two or even more remotes each. It seems obvious, but I need help. I hope I can do it. Can you tell me how?
    Thank You.
    Arthur

  2. #2
    Authorized Lutron Contributor
    Join Date
    May 2013
    Posts
    332
    Quote Originally Posted by Art743 View Post
    I am very pleased with my Caseta/SmartBridge system. But I am setting some remotes in rooms to be used simply for local control and would like to pair single Caseta dimmers with two or even more remotes each. It seems obvious, but I need help. I hope I can do it. Can you tell me how?
    Thank You.
    Arthur
    You can program multiple remotes to the same dimmer:

    1. You need to hold the "Off" (bottom) button of the dimmer until all of the status LED start flashing (should take about 6-10 seconds).
    2. Then hold the "Off" (bottom) button of the Pico remote until the lighting load flashes bright/dim a couple of times (also about 6-10 seconds), and the dimmer exits programming mode.
    3. Repeat steps 1 & 2 for any additional Pico remotes that you want to use to control that dimmer.

Similar Threads

  1. Link wall dimmer to plug dimmer
    By Jwindle in forum Programming - CAS
    Replies: 13
    Last Post: 01-11-2017, 09:59 AM
  2. Android app and 15 button remotes?
    By wkearney99 in forum General Discussion - RA2
    Replies: 10
    Last Post: 01-02-2014, 02:33 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •