I saw this posted before, and I am still not able to find the answer. I am upgrading the firmware on a repeater to 8.2 and it keeps dying at 13% exactly and then says to power cycle the repeater. I saw this issue in the forum but didn't get an answer. Here is what I have done
-Found Rep on LAN no problem
-Tried to upgrade the firmware and it failed at 13%
-Power Cycled and de activated the repeater
-Tried to upgrade the firmware and it failed at 13%
Connected the rep directly to the computer. Established communication
-Tried to upgrade the firmware and it failed at 13%
-checked network settings on VM Ware. Currently running bridged
Disabled all firewalls
-Tried to upgrade the firmware and it failed at 13%
-Power Cycled and de activated the repeater
restarted the software
restarted the computer
-Tried to upgrade the firmware and it failed at 13%
-Power Cycled and de activated the repeater
I am out of options. I guess I can call tech support if I have to...