Thanks Thanks:  1
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5

Thread: DALI Load type problem

  1. #1
    Junior Member
    Join Date
    Dec 2013
    Posts
    29

    DALI Load type problem

    I don't know if anyone has spotted this,

    When you make a DALI LED fixture and you set the low end level to 1%.

    When you go to add a circuit or load with that load type it comes back with a Low end of 10%

    Annoying !!

    Any ideas !!

    Thanks

    PS I am using 7.4 or 8.1 with the same effect.

  2. #2
    Junior Member
    Join Date
    Oct 2013
    Posts
    25
    Edit fixtures/dimming range
    Set to 1% and then you can change the low end
    This worked for me on 8.1. Haven't tried it on 7.x though

  3. #3
    Junior Member
    Join Date
    Dec 2013
    Posts
    29

    nope

    Quote Originally Posted by LightBrigade View Post
    Edit fixtures/dimming range
    Set to 1% and then you can change the low end
    This worked for me on 8.1. Haven't tried it on 7.x though
    Tried what you did on 7.4 and 8.1
    It did not work.
    I made a new fixture, set the low end to 1% and the Dimmer range to 1%.
    Then went to the load page.
    entered a new load with the new fixture type that the low end reads 10% !!!!!

  4. Thanks Armando B. thanked for this post
  5. #4
    Authorized Lutron Contributor
    Join Date
    May 2013
    Posts
    513
    Thank you for this feedback; we are able to reproduce this and will work with our software team to fix it in a future release.

  6. #5
    Junior Member
    Join Date
    Oct 2013
    Posts
    25
    Sorry abutchart - looks like you found an issue! Not sure why it isn't consistent though?!

Similar Threads

  1. DALI addresses & Excel load schedule report
    By LightBrigade in forum General Discussion - HWQS
    Replies: 1
    Last Post: 04-29-2015, 11:30 AM
  2. LQSE-2DAL-D & DALI driver issues
    By jwbcinergy in forum Troubleshooting - HWQS
    Replies: 2
    Last Post: 01-25-2015, 08:08 AM
  3. problem with 6D not controlling a MLV load
    By Trax95008 in forum Troubleshooting - RA2
    Replies: 4
    Last Post: 05-21-2014, 11:59 AM
  4. Replies: 1
    Last Post: 11-21-2013, 10:15 AM
  5. Software does not load
    By Armando B. in forum Troubleshooting - HWQS
    Replies: 1
    Last Post: 07-18-2013, 11:00 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •