Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3

Thread: Maestro C.L Dimmer wired with a standard 3 way switch.

  1. #1
    Senior Member
    Join Date
    May 2013
    Posts
    420

    Maestro C.L Dimmer wired with a standard 3 way switch.

    We received this question from a customer, and thought others might be interested in this topic...

    Why isn't the dimmer switching correctly at both locations?

    In most cases there is 2 reasons for this. The dimmer needs to be programmed or the standard 3 way switch needs rewired.

    For the dimmer programming refer to the section of the instructions that shows 2 fingers pushing on the Maestro.

    For the modified wiring of the standard 3 way switch refer to section 5b of the instructions.

    Instructions are attached to this post.
    Attached Files Attached Files

  2. #2
    Junior Member
    Join Date
    Nov 2016
    Posts
    1
    Perfect! Thank you, fixed my issue!

  3. #3
    Junior Member
    Join Date
    Jun 2017
    Posts
    1
    Yeah, I should have read the installation instructions as I've rewired my entire sub panel and can do just about anything in my house, but read instructions :)

    In the programming section, I think Lutron should add small text "IL1" next to the bottom LED indicator, another "IL2" for next LED up, ..., IL4 in the middle, ...
    Just $0.02.

Similar Threads

  1. Aurora - Adding a replacement dimmer/switch
    By Blair S. in forum Programming - Controls
    Replies: 0
    Last Post: 07-29-2013, 07:38 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •