Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4

Thread: LED Tape recommendations?

  1. #1

    LED Tape recommendations?

    Looking for some real world feedback. There is a TON of this stuff out there on the market.

    Can anyone recommend a flexible (relatively easy to cut to fit) LED tape and power supply setup that works (dimable) well in the Lutron world (6NA and RPMA)?
    Audio, Video, Networking, & Automation Designed Around You

  2. #2
    Authorized Lutron Contributor
    Join Date
    May 2013
    You can go to and make a search to help determine what tape lights we have tested with our controls. You shoud put under "Fixture/Lamp Type" the "Cove Strip" lights. Under Lutron Control, you can put "HomeWorks Panel" which will give you test results for RPMs or "Ra2 / HWQS Dimmers" which some results can highlight the 6NA dimmers.

  3. #3
    I installed some LED strips from with their magnetic dimmable drivers. 6NA dims about 40W of that LED strip without any issues.

  4. #4
    I ordered a bunch of 24v 90+ CRI high-density tape from Super Bright LEDs dot com, along with aluminum channels and frosted lenses. Running them with Hi-Lume A-Series drivers from RR2 6NA dimmers. Works great and looks great. Only thing less than completely perfect is the high-density tape gets pretty hot if run above 80% -- fortunately 50% is very, very bright. I have used the A-Series drivers a couple of times in various situations and they are terrific, never had any dimming issues.

Similar Threads

  1. LED ribbon/tape lighting recommendations
    By trx250r87 in forum General Discussion - RA2
    Replies: 5
    Last Post: 07-20-2016, 11:48 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts