Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2

Thread: Cueserver control

  1. #1
    Junior Member
    Join Date
    Nov 2013

    Cueserver control

    Cueserver is DMX output device that can be controlled via telnet. I can send 'open' then send 'M2' and the command 'M2' is implemented in the cueserver. Both events happen after I push the enter key. I assume that the cueserver is looking for a carriage return line feed. I cannot get the QS to communicate with the cueserver. I have tried <CR>, ^M, \n\r
    Any ideas?

  2. #2
    Authorized Lutron Contributor
    Join Date
    May 2013
    Thank you for this feedback. You can add a line feed or carriage return to the strings sent by HWQS by going to the "Tools->Configure Integration" menu. You can then check the "Add RS232 Terminator" option and select what you would like to send. See the image attached for more info.

    Click image for larger version. 

Name:	lfcr.png 
Views:	11 
Size:	35.0 KB 
ID:	329

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts