Thanks Thanks:  1
Likes Likes:  1
Results 1 to 2 of 2

Thread: WPM No outputs

  1. #1
    Junior Member
    Join Date
    Mar 2014
    Posts
    6

    WPM No outputs

    So strange problem. I've put in many of the QS WPM's with no problems. Today I pulled one off the shelf to take care of a client who added a bunch of incandescent pendents. Powered up the unit before I hooked up the QS link, and not a single zone came up to any intensity. All the load LED's raise and lower and for all practical purposes looks to be working as it should.. Pulled power and hot checked each zone again, had done the same prior to hook up and all of them work fine, no trips, simply all good. I don't think I have ever had a WPM just not work at all, clicks on.. clicks off, dim's via zone LED's and it is not on the QS link so just at default.

    What am I missing or is it just bad

    LGSONE

  2. #2
    Junior Member
    Join Date
    Mar 2014
    Posts
    6
    Well, thats a first..well maybe not but very rare, replaced the WPM with a grafik eye... worked perfect. Been some time since bad out of the box has happened. Last time I had that high of a ticket item bad out of the box was an original SBI panel. O well, it had been on the shelf for awhile so hoping warranty isn't a problem..

    LGSONE

  3. Thanks Armando B. thanked for this post
    Likes Armando B. liked this post

Similar Threads

  1. Assign Inputs/Outputs Pop-up Missing or Disappeared
    By Ty W. in forum Troubleshooting - HWQS
    Replies: 1
    Last Post: 05-11-2017, 02:50 PM
  2. Momentary / maintained outputs on QSE-IO
    By KPSchweser in forum Programming - HWQS
    Replies: 1
    Last Post: 11-25-2014, 01:30 PM
  3. VCRX - Integration IDs for Outputs
    By DSinSF in forum General Discussion - HWQS
    Replies: 2
    Last Post: 11-03-2014, 04:31 PM
  4. Open outputs on Lutron QS dimmers and relay modules
    By etienneterblanche in forum General Discussion - HWQS
    Replies: 2
    Last Post: 08-26-2014, 03:10 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •