Thanks Thanks:  0
Likes Likes:  1
Results 1 to 2 of 2

Thread: Backlit Engraving for RR2 ?

  1. #1

    Backlit Engraving for RR2 ?

    Hi

    I have a RR2 system and i would like to get my keypads engraved.

    I was told that RR2 did not have backlit engraving, only Homeworks had it.

    But I just read a Lutron document (RadioRa 2 Product Specifications 369-221c 09.02.10) that says "RadioRA 2 keypads feature large, easy-to-usebuttons, plus a unique backlit engraving option thatmakes the keypads readable any time of the dayor night".

    How can i get the backlit engraving mentioned in this document, instead of the regular engraving?

    This is the link for the document: http://www.lutron.com/TechnicalDocum...b_20100518.pdf

    Thanks in advance for you comments?

  2. #2
    Senior Member
    Join Date
    Jun 2013
    Posts
    1,365
    All keypads are back-lit. The designated button configuration turns the backlights on and off per which buttons the software thinks are there. When light colored buttons are used, the keypads are engraved with dark letters so they can be seen day and night. If the keypad color is dark, then the letters are reverse engraved. This causes the letters to light up at night with "white" letters on the colored keypad during the day. Use the software and change the colors on a keypad to determine which color buttons come with the color of keypad you want (ie, taupe buttons on the Hot/red keypad). There is no way to select the colors of the buttons, Lutron has a default for each color that cannot be changed.
    Simple automation when DIY isn't working
    intuitivehomecontrols@gmail.com
    fb.me/intuitivehomecontrols

  3. Likes schalliol liked this post

Similar Threads

  1. 8.0.0 engraving report problem
    By smermier in forum General Discussion - HWQS
    Replies: 2
    Last Post: 10-21-2015, 06:32 AM
  2. Engraving Ordering
    By Armando B. in forum General Discussion - RA2
    Replies: 4
    Last Post: 06-08-2015, 06:22 AM
  3. Pico Engraving Option, How?
    By schalliol in forum Design Assistance - RA2
    Replies: 9
    Last Post: 04-10-2015, 10:17 PM
  4. Engraving Wallplates Above/Below Controls?
    By schalliol in forum General Discussion - RA2
    Replies: 1
    Last Post: 07-28-2014, 08:55 AM
  5. RA 2 Icon Engraving
    By tedrosenberger in forum General Discussion - RA2
    Replies: 1
    Last Post: 02-27-2014, 07:31 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •