Results 1 to 2 of 2

Thread: Programing Keypad buttons on VCRX

  1. #1

    Programing Keypad buttons on VCRX

    I cannot find a way to program the keypad buttons on the VCRX. I am sure this is a newbie question but I am stuck!

    Thanks in advance

  2. #2
    Senior Member
    Join Date
    Jun 2013
    Posts
    643
    Are you trying to program lights and dimmers to the keypad buttons? Then select the VCRX in the pulldown menu when you are in the program tab of the software.

    If you are trying to program the keypad to a car visor transmitter, then you must use the "learn" sequence from the user manual for the VCRX.
    1- press and hold the LEARN button on the VCRX until the LED is lit solid.
    2- press and release the keypad button (or CCO button) you wish to apply to the transmitter, The keypad's LED should light solid
    3- press and hold the transmitter button you wish to use for that keypad scene until the keypad LED flashes.
    4- continue sequence 2-3 for each transmitter button and the keypad scenes
    5- press and hold learn button until LED turns off
    Residential Lighting and Shading Specialist for CED Escondido

    mbalay@cedescondido.com

Similar Threads

  1. Replies: 0
    Last Post: 02-02-2015, 03:56 PM
  2. Replies: 0
    Last Post: 11-26-2014, 09:48 AM
  3. Replies: 3
    Last Post: 07-11-2014, 08:00 AM
  4. Raise and Lower buttons Affecting Scenes Conditionally
    By Armando B. in forum Programming - HWQS
    Replies: 0
    Last Post: 05-27-2014, 05:09 PM
  5. Programming Ceiling Fan Buttons
    By thomod in forum Programming - HWQS
    Replies: 4
    Last Post: 04-17-2014, 10:36 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •