Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6

Thread: Button Programming For Venetian Blinds

  1. #1
    Senior Member
    Join Date
    Oct 2013
    Posts
    114

    Question Button Programming For Venetian Blinds

    When using the open/close/stop programming model on a button (seeTouch connected to QS processor) to control a venetian blind, how is tilt effected? Or does this programming model only encompasses lift?

    thanks

  2. #2
    Authorized Lutron Contributor
    Join Date
    Jun 2013
    Posts
    91
    In the Homeworks QS programming, the open and close commands are presets and can be set by going to "program", then "shade presets" in the GUI to determine both the lift and tilt settings.

    By default, the 'open' command sends lift to 100%, and tilt is unaffected. The 'close' command sends the lift to 0%, and the tilt to 0% (closed).

  3. #3
    Junior Member
    Join Date
    Oct 2020
    Posts
    1
    want to control three windows with my home server.Would I just need a 6 way 12V USB relay to do this? If I use 12V motors or would a 2 way relay be enough depending on the external power supplyAnd than program a script that switcheswindow 1 up - window 2 up - window 3 up/ windows UpAnd the other relayswindow 1 down - window 2 down - window 3 down/ windows downMaybe I could integrate to pull sunrise and sundown times from the internet to time every thing.Any flaw in my setup?

  4. #4
    Authorized Lutron Contributor
    Join Date
    May 2013
    Posts
    572
    Which Lutron shades are you controlling, or planning to control?

  5. #5
    Senior Member
    Join Date
    Sep 2014
    Posts
    119
    Umm Brian you did notice that this is a spammer, right??

  6. #6
    Senior Member
    Join Date
    Oct 2013
    Posts
    1,963
    Quote Originally Posted by johnmax View Post
    Umm Brian you did notice that this is a spammer, right??
    Brian doesn't judge.
    LED, Incorporated
    Raleigh, NC 27614

Similar Threads

  1. New Horizontal Sheer Blinds
    By sundirec in forum General Discussion - Shades
    Replies: 4
    Last Post: 06-05-2017, 05:06 PM
  2. Replies: 7
    Last Post: 04-26-2017, 03:59 PM
  3. Lutron Honeycomb Blinds
    By claudiu in forum General Discussion - Legacy HW
    Replies: 0
    Last Post: 12-03-2014, 03:04 AM
  4. Replies: 0
    Last Post: 11-26-2014, 10:48 AM
  5. Programming the QSE -iO for control of 3rd party blinds.
    By jimathome in forum Programming - Shades
    Replies: 1
    Last Post: 09-22-2014, 11:45 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •