Results 1 to 2 of 2

Thread: Button Programming For Venetian Blinds

  1. #1

    Question Button Programming For Venetian Blinds

    When using the open/close/stop programming model on a button (seeTouch connected to QS processor) to control a venetian blind, how is tilt effected? Or does this programming model only encompasses lift?

    thanks

  2. #2
    Authorized Lutron Contributor
    Join Date
    Jun 2013
    Posts
    91
    In the Homeworks QS programming, the open and close commands are presets and can be set by going to "program", then "shade presets" in the GUI to determine both the lift and tilt settings.

    By default, the 'open' command sends lift to 100%, and tilt is unaffected. The 'close' command sends the lift to 0%, and the tilt to 0% (closed).

Similar Threads

  1. New Horizontal Sheer Blinds
    By sundirec in forum General Discussion - Shades
    Replies: 4
    Last Post: 06-05-2017, 04:06 PM
  2. Replies: 7
    Last Post: 04-26-2017, 02:59 PM
  3. Lutron Honeycomb Blinds
    By claudiu in forum General Discussion - Legacy HW
    Replies: 0
    Last Post: 12-03-2014, 02:04 AM
  4. Replies: 0
    Last Post: 11-26-2014, 09:48 AM
  5. Programming the QSE -iO for control of 3rd party blinds.
    By jimathome in forum Programming - Shades
    Replies: 1
    Last Post: 09-22-2014, 10:45 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •