Thanks Thanks:  0
Likes Likes:  0
Results 1 to 3 of 3

Thread: programming occ/vac sensors for multiple levels on a schedule using Lutron software

  1. #1
    Junior Member
    Join Date
    Feb 2015
    Posts
    8

    programming occ/vac sensors for multiple levels on a schedule using Lutron software

    I would love the ability to set schedule for occupancy sensor for level adjustments. i.e. hallway at 100% from 8am to 6pm; 50% 6pm to 11pm; 10% 11pm to 6am; 50% 6am to 8am.
    I currently have 3 sensors on time clock events to do this disabling the alternate sensors leaving the one programmed at the level desired. Is there an easier way I am missing? I just am getting into the 8.2 inclusive software but have not seen that as an option.
    If not, it would be glorious to add to the programming.

  2. #2
    Senior Member
    Join Date
    Jun 2013
    Posts
    1,365
    This can't be done under the Ra2 platform by itself. Third party would be able to pick up the sensor on/off commands and then activate a phantom button dependent on time.
    Simple automation when DIY isn't working
    intuitivehomecontrols@gmail.com
    fb.me/intuitivehomecontrols

  3. #3
    Junior Member
    Join Date
    Feb 2015
    Posts
    8
    Thanks so much, I was thinking backwards, doing way to much work without thinking it out. Using the occ/vac sensor to trigger the phantom button I want is soooo much easier.
    Thanks again

Similar Threads

  1. Replies: 7
    Last Post: 04-26-2017, 02:59 PM
  2. Problems Lutron App Lockout- Need to reset proc- Multiple Jobs
    By hometechinc in forum Troubleshooting - HWQS
    Replies: 3
    Last Post: 01-09-2015, 03:39 PM
  3. Flash Test - Bug in Programming Software or Firmware?
    By dinom in forum General Discussion - RA2
    Replies: 3
    Last Post: 01-09-2015, 12:50 PM
  4. Replies: 3
    Last Post: 01-13-2014, 07:08 AM
  5. Pico and Occ Sensors out of programming
    By mandbelectric in forum Troubleshooting - RA2
    Replies: 1
    Last Post: 12-31-2013, 03:11 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •