Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2

Thread: Sauna control from QS

  1. #1

    Sauna control from QS

    Client wants to turn on sauna from Lutron QS system.

    Any experience?

    Any reason not to?

    As in-commercial controller - contactor- Lutron relay to activate, timed for one hour.

  2. #2
    Authorized Lutron Contributor
    Join Date
    May 2013
    You can use a QSE-IO contact closure to trigger a relay that will turn the Sauna on or off. You can program this in a sequence where it would have a programmed delay to go from on to off automatically.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts