Cueserver control

[jltsale]

Cueserver is DMX output device that can be controlled via telnet. I can send 'open 10.0.0.205' then send 'M2' and the command 'M2' is implemented in the cueserver. Both events happen after I push the enter key. I assume that the cueserver is looking for a carriage return line feed. I cannot get the QS to communicate with the cueserver. I have tried <CR>, ^M, \n\r
Any ideas?

[Armando B.]

Thank you for this feedback. You can add a line feed or carriage return to the strings sent by HWQS by going to the "Tools->Configure Integration" menu. You can then check the "Add RS232 Terminator" option and select what you would like to send. See the image attached for more info.