After a few calls to support, hopefully someone here can help me.I have a PowPak controlling lighting for 16 rooms, and a Pico remote controlling the PowPak.
There are 6 setups like this and 4 work reliably.
The problem is 2 of the PowPaks are on the outer border for range from the Pico remote.
-The PowPak seems to be compatible with RA2 Select.
-RA2 Select seems to be compatible with a L-REPPRO repeater.
-Pico remote seems to be compatible with both.
Can I simply pair the Pico to the new L-REPPRO repeater, to have it re-broadcast the remote's signal?
What's the best way to set up a system (if possible)?
Caveat: There is no internet.
Thanks