Results 1 to 8 of 8

Thread: Homeworks V5.4905 program will not upload

  1. #1
    Junior Member
    Join Date
    Dec 2014
    Posts
    5

    Homeworks V5.4905 program will not upload

    My computer ( Dell Optiplex360 w/ Windows Vista Basic ) has been supporting my homeworks software for years with no upload problems. Suddenly the controller will not accept an upload & displays the message: "proc1.dat unsuccessful", or "dsp_kernel.s (1/27/2005 01:11pm)". Download seems to work fine and the wall units flash when attempting upload; they then time out & return to original program. Can you tell me how to resolve this issue?

  2. #2
    Senior Member
    Join Date
    Oct 2013
    Posts
    338
    Are you uploading via RS232 or Ethernet ?

  3. #3
    Junior Member
    Join Date
    Dec 2014
    Posts
    5
    RS232 via serial port

  4. #4
    Junior Member
    Join Date
    Dec 2014
    Posts
    5
    I am using the RS232 Direct connect on Com Port 3 with a 115200 Baud Rate.

  5. #5
    Authorized Lutron Contributor
    Join Date
    May 2013
    Posts
    513
    We would recommend using 9600 baud rate. If you have an 8-series processor, turn on dip switch s2-1 (the first switch on the group on the right) which will also force the processor on that baud rate. If you have a 4-series processor, turn dip switch 3 on.

    For further assistance with this issue, could you please provide us with the project file and the processor event logs (in terminal go to File->Processor Event Logs) from the system. Please send them to hwsupport@lutron.com and reference this forum post.

  6. #6
    Junior Member
    Join Date
    Dec 2014
    Posts
    5
    Thank you so much! Changing the baud rate to 9600 seems to have fixed the problem. FYI the processor Model is HRFP-2P. The dipswitch was 3rd from left. AS requested, I am including a copy of the terminal event log:
    ---------------------------------------------------------------------------------
    Terminal.log Started 12/13/2014 9:57:37 AM
    ----------------------------------------------------------------------------------
    9:57:37 AM (Rx)
    9:57:37 AM (Rx)
    9:57:37 AM (Rx)
    9:57:38 AM (Tx) REPLYON
    9:57:38 AM (Tx)
    9:57:38 AM (Tx) GETHAND
    9:57:39 AM (Rx)
    9:57:39 AM (Rx)
    9:57:39 AM (Rx)
    9:57:39 AM (Rx) AT&F1E0F1Q1S0=1M0&C0&D0
    9:57:39 AM (Rx)
    9:57:39 AM (Rx)
    9:57:39 AM (Rx)
    9:57:39 AM (Rx)
    9:57:39 AM (Rx)
    9:57:39 AM (Rx) AT&F1E0F1Q1S0=1M0&C0&D0
    9:57:39 AM (Rx)
    9:57:39 AM (Rx)
    9:57:39 AM (Rx) L232>
    9:57:39 AM (Rx)
    9:57:39 AM (Rx) L232>
    9:57:39 AM (Rx)
    9:57:39 AM (Rx) RS232 handshaking on port 01:03:001 is Hardware Handshaking
    9:57:39 AM (Rx)
    9:57:39 AM (Rx) L232>
    9:57:40 AM (Tx)
    9:57:40 AM (Tx)
    9:57:40 AM (Rx)
    9:57:40 AM (Rx)
    9:57:40 AM (Rx) L232>
    9:57:40 AM (Rx)
    9:57:40 AM (Rx) L232>

  7. #7
    Senior Member
    Join Date
    Oct 2013
    Posts
    338
    Turn off hand shaking on rs232 port can you upload a screenshot of your port settings. IS this a multi processor job?

  8. #8
    Junior Member
    Join Date
    Dec 2014
    Posts
    5
    I changed the baud rate to 9600 and that fixed the problem.

Similar Threads

  1. FTP not Connecting to Illumination for Upload with Windows 7 Pro
    By Technical Comfort, Inc in forum General Discussion - Legacy HW
    Replies: 3
    Last Post: 12-17-2014, 10:35 AM
  2. HomeWorks Interactive Upload Issue (RF)
    By jkvossen in forum Troubleshooting - Legacy HW
    Replies: 6
    Last Post: 08-17-2014, 08:35 PM
  3. 1 new shade = 1 hour activating and a 45 minute upload
    By 39CentStamp in forum Programming - HWQS
    Replies: 6
    Last Post: 04-24-2014, 11:03 PM
  4. Illuminations and Windows Upload Failures
    By Vic F. in forum Troubleshooting - Legacy HW
    Replies: 5
    Last Post: 12-20-2013, 04:04 PM
  5. Illuminations and Windows 8.1 upload failures
    By Craig W. in forum Troubleshooting - Legacy HW
    Replies: 2
    Last Post: 11-22-2013, 06:28 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •