Is there any interface/gateway that I could use to control HomeWorksQS system via KNX?
Printable View
Is there any interface/gateway that I could use to control HomeWorksQS system via KNX?
You can control a HomeWorks QS system from a 3rd-party device over either an RS-232 connection (using a supported converted) or an Ethernet connection (over Telnet). For directions on setting up a 3rd-party system to control the HomeWorks QS system, please reference Scenarios 1 and 3 in this app note.
If you have difficulty setting up the 3rd-party system, feel free to reference the existing thread on troubleshooting 3rd-party integration in HWQS here.
One very important note that should be noted. When using the B&B model DO NOT set or use a password. It will not work. I have used them before and after I figured out that the password was screwing me up it worked perfectly. It seems you have to leave this device unsecured on the network unless I haven't spent enough time playing with it.