Graphic Eye & GRX-RV operation
Could anyone help please? i have a Grapic Eye GRX-3106 controlled by a 8 button wallstation and a GRX-AV interface. Scene 5,6,7,8 are selected from buttons on the wall station. Scenes 11,12,13 are activated from the interface inputs (via PIR sensors) When scene 5 is selected zone 6 is fully on and remains so until a scene change which is operation fine. When either scenes 11,12 or 13 are activated (via the GRX-AV) we have programmed zone 6 to be unaffected which again works fine. When either scene 11,12 or 13 PIR deselects the input from the GRX-AV the whole GRX-3106 switches off which takes out zone 6 (scene 5) which we want to maintain as on . could anyone advise what settings we need to adopt to achieve this pleaseMany thanks Phil
Multiple GraifEye QS units - and wireless WiFi Home automation
I've got 4 x GrafikEye QS units distributed throughout my house. Each of these units controls 6 zones. The units are wired together i.e. I can program any button on any GrafikEye control panels to select zones in any/all rooms.I had these units installed 5 years ago when we renovated our property and now regret not buying something that offered support for WiFi and/or Home Automation solutions.I'm aware there is a "bridge" unit (part number GRX-CI-PRG) which offers the ability to connect the GrafikEye QS control systems via Serial/RS232 and TCP/IP. These are not exactly the cheapest units to buy. I am wondering;1) Is this my only viable option to get WiFi and/or Home Automation integration with my GrafikEye units2) Given that all GrafikEye units are wired together can I use a single GRX-CI-PRG ? Or do I need 1 unit per GrafikEye QS main boards ?3) I'm not a novice when it comes to mucking around with the electronics in my house and know how to be safe whilst installing stuff - Is it simple to install the GRX-CI-PRG unit myself or do I need a Lutron Fitter to do the work ?