Caseta in wall dimmer w/ Cree 40w LED -- flickers when turning off

Fellow Lutron owners,

I have recently installed a set of lutron caseta wireless in wall dimmer switches.
The ones installed in the kitchen, living room, and dining room, all are working fine. They're using Phillips BR40 65watt LED bulbs.

All are turning on / off / dimming correctly.

I recently installed one for my bedroom.
This is a simple 2 black + 1 ground installation to a ceiling light fixture.
Bulb used is a 40w CREE LED bulb. I believe this is listed as a compatible bulb.

SA19-04650OMB-12DE26-1C

Here is what's happening, when switching light off, it goes through the cycle of dimming until off... this works, however immediately after it does off, it flickers for a split second.. almost as if there is a last pulse of electricity to the bulbs.

see video --
http://daicast.tumblr.com/post/15775...eta-in-bedroom


any help is appreciated.

Rick

Be sure it is Compatible and on the list, philips bulbs work good.

so long as it is not flashing all the time it is off you either need to live with it, or replace the bulb.

Quote:

---

Originally Posted by Sawdust

Be sure it is Compatible and on the list, philips bulbs work good.

so long as it is not flashing all the time it is off you either need to live with it, or replace the bulb.

---

Yes, the cree light bulbs I used should be compatible. But I will give phillips a try.

Rick