Caseta Wireless only works via the FASS
I've recently installed the PD-6ANS to try and control my porch light. It shares a box with another Lutron wireless dimmer (no neutral required).
The new PD-6ANS is connected, LED is on and green, however, the light doesn't turn on unless I press the on switch, and then open and close the FASS. Then, if I turn the light off, via the app or the switch itself, it won't turn back on unless I repeat the above - therefore I can't control it via the app / timers, etc, which is the reason I want it.
I hooked up the wire that was at the top of the old switch to the black, and the wire that was at the bottom of the old switch to the red.
I have an older house, I THINK I hooked up this switch to a neutral - there was a white wire inside the box, that wasn't connected to anything, and I hooked this to the neutral line. I guess it's possible this actually isn't a neutral, but color-wise and location wise, I think it is.
Any other troubleshooting I can try?