Is there a way to have QS processors use NIST time based on the location set in the project details? If not, does the SmartBridge Pro add this feature?
Jeff
Printable View
Is there a way to have QS processors use NIST time based on the location set in the project details? If not, does the SmartBridge Pro add this feature?
Jeff
Dear Jeff,Quote:
Originally Posted by JeffreySkalny
Thank you for the inquiry.
Currently the processor will only get time from the computer that transfers to the system or by changing in a telnet session.
The Smart Bridge does get time from NTP servers. When the Smart Bridge is setup the mobile device will send the Smart Bridge the location information. The Smart Bridge will use this location and the information from the NTP pool to determine the correct time.
Does this mean the Smart Bridge will update the QS processors at some regular interval, or is this only used on the Smart Bridge unit?Quote:
Originally Posted by Kevin P.
Thank you,
Jeff
Dear Jeff,Quote:
Originally Posted by JeffreySkalny
The Lutron Smart Bridge will not communicate with the HomeWorks QS system.
I think you might be referring to the Lutron Connect Bridge. Part of the spec for the Lutron Connect Bridge is timeclock sync. This will update the QS processors to ensure the correct time is being kept. http://www.lutron.com/TechnicalDocum...ect_Bridge.pdf