Printable View
Hi! I have recently upgraded my Homeworks Illumination to QS and everything works just fine, with one exception. The HWI-keypads lower/raise buttons doesn´t work. When we look at them in the system it says 'Master Lower' on the lower button for example. Does anyone here have any experience of the same problem? Best regards, Hans
Thank you for your post halipte.
Those are the default programming for the raise and lower within the software. If we are having issues with them, first thing we would like to check is the keypad at the correct dipswitch address. If that is all correct we would like to see a project file or if possible a support file to hwsupport@lutron.com and we investigate this further for you!
Thanks For The Great ConTent Sir. I Will also shaer with my Friend & ones again Thanks a lot.Very well explained. Thanks for the share.https://customersurveyz.onl/www-valu...re-com-survey/
Hello, I've got a 6-button keypad with Raise/Lower. Everything works fine and I'm really glad I bought it. But I'm also looking for a HomeWorks Technical Reference Guide (pdf).Quote:
Originally Posted by halipte I had Homeworks Illumination and then upgraded it to QS, so I'm using a keaypad to do my homework for me but seems I can't manage the programmable buttons. What keypads do you have? Any issues with them? Thanks.
Thanks for your post Jyrki.
The closet thing we have to a Tech Reference Guide for QS would be found here at https://reader.mediawiremobile.com/L...iewer?page=111. Hope this helps!